Welcome to OGeek Q&A Community for programmer and developer-Open, Learning and Share
Welcome To Ask or Share your Answers For Others

Categories

0 votes
780 views
in Technique[技术] by (71.8m points)

python - Send HID report with PyUSB


UPDATE


I managed to send the data properly. For anyone who ran into the same problem, I used the following code:

data=[0x00, 0x04, 0x04, 0xFF, 0xFF, 0xFF, 0x00, 0x00]
result=dev.ctrl_transfer(0x21, 0x9, wValue=0x200, wIndex=0x00, data_or_wLength=data)

(This is based on the answer posted here: link)

But I don't understand in detail, why I have to use

bmRequestType=0x21
bRequest=0x9
wValue=0x200

What is the explanation?


Initial request:


I'm desperately trying to send a simple report to a HID-device using PyUSB.

Using "SimpleHIDwrite" I confirmed that the device works just as expected. I want to send this data:

report ID: 00

data: [00, 04, 04, FF, FF, FF, 00, 00]

Sending data using SimpleHIDwrite

I'm quite new to Python and USB and I can't figure out how to do this using dev.ctrl_transfer or dev.write.

Also, there are some posts about sending data to HID devices, but I couldn't figure out how to solve my problem. How can I fix it?

Here are some more details:

 # Based on https://github.com/walac/pyusb/blob/master/docs/tutorial.rst

import usb.core
import usb.util

# Find our device
# dev = usb.core.find(idVendor=0xfffe, idProduct=0x0001)
dev = usb.core.find(idVendor=0x1781, idProduct=0x8c0)


# Was it found?
if dev is None:
    raise ValueError('Device not found')

dev.set_configuration()

cfg = dev[0]
intf = cfg[(0,0)]
ep = intf[0]

# dev.write(ep.bEndpointAddress, [0x00, 0x00,0x04,0x04,0xFF,0xFF,0xFF,0x00, 0x00], 1000)
# dev.ctrl_transfer(bmRequestType, bRequest, wValue=0, wIndex=0, data_or_wLength=None, timeout=None)

print("print ep")
print(ep)
print("print cfg")
print(cfg)
print("print intf")
print(intf)

And the result of the script above is this:

print ep
      ENDPOINT 0x81: Interrupt IN ==========================
       bLength          :    0x7 (7 bytes)
       bDescriptorType  :    0x5 Endpoint
       bEndpointAddress :   0x81 IN
       bmAttributes     :    0x3 Interrupt
       wMaxPacketSize   :    0x8 (8 bytes)
       bInterval        :    0xa
print cfg
  CONFIGURATION 1: 100 mA ==================================
   bLength              :    0x9 (9 bytes)
   bDescriptorType      :    0x2 Configuration
   wTotalLength         :   0x22 (34 bytes)
   bNumInterfaces       :    0x1
   bConfigurationValue  :    0x1
   iConfiguration       :    0x0
   bmAttributes         :   0x80 Bus Powered
   bMaxPower            :   0x32 (100 mA)
    INTERFACE 0: Human Interface Device ====================
     bLength            :    0x9 (9 bytes)
     bDescriptorType    :    0x4 Interface
     bInterfaceNumber   :    0x0
     bAlternateSetting  :    0x0
     bNumEndpoints      :    0x1
     bInterfaceClass    :    0x3 Human Interface Device
     bInterfaceSubClass :    0x0
     bInterfaceProtocol :    0x0
     iInterface         :    0x0
      ENDPOINT 0x81: Interrupt IN ==========================
       bLength          :    0x7 (7 bytes)
       bDescriptorType  :    0x5 Endpoint
       bEndpointAddress :   0x81 IN
       bmAttributes     :    0x3 Interrupt
       wMaxPacketSize   :    0x8 (8 bytes)
       bInterval        :    0xa
print intf
    INTERFACE 0: Human Interface Device ====================
     bLength            :    0x9 (9 bytes)
     bDescriptorType    :    0x4 Interface
     bInterfaceNumber   :    0x0
     bAlternateSetting  :    0x0
     bNumEndpoints      :    0x1
     bInterfaceClass    :    0x3 Human Interface Device
     bInterfaceSubClass :    0x0
     bInterfaceProtocol :    0x0
     iInterface         :    0x0
      ENDPOINT 0x81: Interrupt IN ==========================
       bLength          :    0x7 (7 bytes)
       bDescriptorType  :    0x5 Endpoint
       bEndpointAddress :   0x81 IN
       bmAttributes     :    0x3 Interrupt
       wMaxPacketSize   :    0x8 (8 bytes)
       bInterval        :    0xa

Process finished with exit code 0
See Question&Answers more detail:os

与恶龙缠斗过久,自身亦成为恶龙;凝视深渊过久,深渊将回以凝视…
Welcome To Ask or Share your Answers For Others

1 Reply

0 votes
by (71.8m points)

This is all you need to do HID with just PyUSB:

  def hid_set_report(dev, report):
      """ Implements HID SetReport via USB control transfer """
      dev.ctrl_transfer(
          0x21,  # REQUEST_TYPE_CLASS | RECIPIENT_INTERFACE | ENDPOINT_OUT
          9,     # SET_REPORT
          0x200, # "Vendor" Descriptor Type + 0 Descriptor Index
          0,     # USB interface № 0
          report # the HID payload as a byte array -- e.g. from struct.pack()
      )

  def hid_get_report(dev):
      """ Implements HID GetReport via USB control transfer """
      return dev.ctrl_transfer(
          0xA1,  # REQUEST_TYPE_CLASS | RECIPIENT_INTERFACE | ENDPOINT_IN
          1,     # GET_REPORT
          0x200, # "Vendor" Descriptor Type + 0 Descriptor Index
          0,     # USB interface № 0
          64     # max reply size
      )

There isn't any need to jump onto the library-wrappers-around-libraries bandwagon. Are you an engineer or what? Just read the documentation. The protocol is not going to change anytime soon.

Finally, yeah. All the four libusbhid's I've seen are written in disastrously horrible C and depend on yet even more libraries. For what is essentially 10 lines of code. Make your own decision.


与恶龙缠斗过久,自身亦成为恶龙;凝视深渊过久,深渊将回以凝视…
OGeek|极客中国-欢迎来到极客的世界,一个免费开放的程序员编程交流平台!开放,进步,分享!让技术改变生活,让极客改变未来! Welcome to OGeek Q&A Community for programmer and developer-Open, Learning and Share
Click Here to Ask a Question

...