Welcome to OGeek Q&A Community for programmer and developer-Open, Learning and Share
Welcome To Ask or Share your Answers For Others

Categories

0 votes
715 views
in Technique[技术] by (71.8m points)

python - How to get frequency axis from an fft function?

So, I am probably missing something obvious, but I have searched through lots of tutorials and documentation and can't seem to find a straight answer. How do you find the frequency axis of a function that you performed an fft on in Python(specifically the fft in the scipy library)?

I am trying to get a raw EMG signal, perform a bandpass filter on it, and then perform an fft to see the remaining frequency components. However, I am not sure how to find an accurate x component list. The specific signal I am working on currently was sampled at 1000 Hz and has 5378 samples.

Is it just creating a linear x starting from 0 and going to the length of the fft'd data? I see a lot of people creating a linspace from 0 to sample points times the sample spacing. But what would be my sample spacing in this case? Would it just be samples/sampling rate? Or is it something else completely?

See Question&Answers more detail:os

与恶龙缠斗过久,自身亦成为恶龙;凝视深渊过久,深渊将回以凝视…
Welcome To Ask or Share your Answers For Others

1 Reply

0 votes
by (71.8m points)

Here is an example.

First create a sine wave with sampling interval pre-determined. we will combine two sine waves with frequencies 20 and 40. Remember high frequencies might be aliased if the time interval is large.

#Import the necessary packages
from scipy import fftpack
import matplotlib.pyplot as plt
import numpy as np

# sampling freq in herts 20Hz, and 40Hz
freq_sampling1 = 10
freq_sampling2 = 20
amplitude1 = 2 # amplitude of first sine wave
amplitude2 = 4 # amplitude of second sine wave
time = np.linspace(0, 6, 500, endpoint=True) # time range with total samples of 500 from 0 to 6 with time interval equals 6/500
y = amplitude1*np.sin(2*np.pi*freq_sampling1*time) + amplitude2*np.sin(2*np.pi*freq_sampling2*time)

plt.figure(figsize=(10, 4))
plt.plot(time,y, 'k', lw=0.8)
plt.xlim(0,6)
plt.show()

enter image description here

Notice in the figure that two sine waves are superimposed. One with freq. 10 and amplitude 2 and the other with freq. 20 and amplitude 4.

# apply fft function
yf = fftpack.fft(y, time.size)

amp = np.abs(yf) # get amplitude spectrum 
freq = np.linspace(0.0, 1.0/(2.0*(6/500)), time.size//2) # get freq axis

# plot the amp spectrum

plt.figure(figsize=(10,6))
plt.plot(freq, (2/amp.size)*amp[0:amp.size//2])
plt.show()

enter image description here

Notice in the amplitude spectrum the two frequencies are recovered while amplitude is zero at other frequencies. the Amplitude values are also 2 and 4 respectively.

you can use instead fftpack.fftfreq to obtain frequency axis as suggested by tom10 Therefore, the code changes to

yf = fftpack.fft(y, time.size)
amp = np.abs(yf) # get amplitude spectrum 
freq = fftpack.fftfreq(time.size, 6/500)
plt.figure(figsize=(10,6))
plt.plot(freq[0:freq.size//2], (2/amp.size)*amp[0:amp.size//2])
plt.show()

We are only plotting the positive part of the amplitude spectrum [0:amp.size//2]


与恶龙缠斗过久,自身亦成为恶龙;凝视深渊过久,深渊将回以凝视…
OGeek|极客中国-欢迎来到极客的世界,一个免费开放的程序员编程交流平台!开放,进步,分享!让技术改变生活,让极客改变未来! Welcome to OGeek Q&A Community for programmer and developer-Open, Learning and Share
Click Here to Ask a Question

...