Recently bought an Asus PRIME B450-PLUS motherboard with 6 SATA connectors.
(最近购买了具有6个SATA接口的华硕PRIME B450-PLUS主板。)
I've got a couple of Akasa SATA hot-swap drives that I'm trying to get running on SATA 5 & 6. I've set the connections as HotSwap Enabled in the BIOS but hotswap is not working. (我有几个要在SATA 5和6上运行的Akasa SATA热插拔驱动器。我已经在BIOS中将连接设置为“ HotSwap Enabled”，但hotswap无法正常工作。)
Running journalctl -f while swapping drives shows no action. (在交换驱动器时运行journalctl -f不会显示任何操作。)
SATA connectors 3 & 4 work fine with these same drives with journalctl -f showing all the communications with the kernel but I'd prefer to get them on 5 & 6, if only for neatness. (SATA连接器3和4可以与这些相同的驱动器一起正常工作，并且journalctl -f显示与内核的所有通信，但我只希望它们整洁地放在5和6上。)
SATA connectors 5 & 6 are separated from 1-4 on the M/B, is there some jumper or BIOS setting I need to mess with? (SATA连接器5和6与M / B上的1-4分开，是否需要弄乱一些跳线或BIOS设置？)
ask by Fudoka translate from so 与恶龙缠斗过久,自身亦成为恶龙；凝视深渊过久,深渊将回以凝视…
